These “subject matter experts” are leaving out critical information. So we’re publishing it for them.
This week, the mainstream media lit up with terrifying headlines screaming about the great dangers of “ghost guns” and the legal loopholes that are making victims out of our nation’s children.
The Trace exclaimed, “Ghost Guns Are Everywhere in California”.
BuzzFeed News warns, “The California High School Shooter Used a Homemade, Untraceable “Ghost Gun” Sheriff Says”.
Los Angeles Times claims, “California is Flooded with “Ghost Guns” and a New State Law Won’t Fix It”.
Americans are no doubt scrolling their daily news feeds gasping at the headlines, agreeing that ‘something’ must be done and allowing this new fear to settle into the back of their minds as they go about their day.
Throughout many of these articles are snippets of information and quotes from groups like Everytown for Gun Safety, Giffords Law Center to Prevent Gun Violence and Newtown Action Alliance.
Surely to the mom reading these terrifying articles, these groups are subject matter experts.
But what if we told you that many of these articles are missing critically important and balanced statements from the very folks who understand firearm functionality – the gunsmiths, the hobbyists, the actual American gun owner?
It is stated by police that the 16-year old Santa Clarita shooter used a firearm that was completed and assembled outside of a traditional manufacturer.
This type of gun, recently deemed a ghost gun, has been legal for Americans to build and own for their own personal use for generations. It is not lawful to transfer a personally assembled firearm to anyone else but the person who built it.
In order to do so, one would need to obtain a serial number, therefore no longer making it a “ghost gun.”
NEW: LA Co. authorities said Friday they have thwarted a potential school mass shooting after seizing an AR-15 rifle, ammunition, a list of intended targets and a drawing of a school's layout during an arrest. https://t.co/mZJldghCt5
— NBC News (@NBCNews) November 22, 2019
The father of the shooter is suspected by some to have made the firearm and was mandated to turn in his firearms prior to his death in 2017 as he was determined to be a prohibited possessor.
Los Angeles County Sheriff Alex Villanueva is quoted by MSN.com saying, “They’re also known as an 80% gun. So 80% of it is assembled already, and you also get the additional 20%.”
According to MSN, Nick Suplina, managing director of Everytown for Gun Safety said, “You’re essentially ordering a firearm, but just completely outside the rule of law.”
However, it is not a gun that someone is ordering. An 80% lower kit does not simply mean that 20% of the parts just snap together.
Contrary to Villanueva’s statement, an 80% lower is not simply unassembled- it is only 80% manufactured which is a huge difference. The unfinished 80% lower requires 20% or more additionally manufacturing to become functional. This includes accurate further milling or drilling of the metal.
Breaking: The gun used in last week’s shooting at Saugus High School was assembled from parts, a so-called ghost gun without a registration number, Sheriff Alex Villanueva confirmed Thursday.https://t.co/2FGXtsVO1f
— Los Angeles Times (@latimes) November 21, 2019
Matthew Larosiere, legal policy director for the Firearms Policy Coalition said to the Mercury News “I can say the 1911 kit build is not for the faint of heart, or wallet… The 1911 kit build is something that would take me, a skilled and highly equipped person, many, many hours to complete. I’d be shocked to see a teenager perform it.”
In fact, the Bureau of Alcohol, Tobacco, Firearms and Explosives defines an 80% lower as an item that “has not yet reached a stage of manufacture that meets the definition of firearm frame or receiver found in the Gun Control Act of 1968 (GCA).”
It is not simply a snap together part but actual further manufacturing of the metal including drilling or milling that needs to be done with skilled gunsmithing to result in a functional lower receiver.
The Gun Control Act of 1968 was landmark legislation that imposed a new change for manufacturers selling firearms in America. For the first time, fully manufactured guns were required to be serialized.
That’s right, for the first 192 years of America’s history, there was no such thing as a serial number on guns and the process is new only in the last 50 or so years. What does the ATF do with these serial numbers?
Did you know that Law Enforcement Today has a private new home for those who support emergency responders and veterans? It’s called LET Unity, and it’s where we share the untold stories of those patriotic Americans. Every penny gets reinvested into giving these heroes a voice. Check it out today.
There is no federal registry of every serial number of guns bought or sold in the United States. The ATF does maintain a database of serial numbers reported lost or stolen as well as some other large batches of firearm sales such as large estates or guns that were already known to have been used in a crime.
However, the fear-invoking term “untraceable ghost gun” is relative. This scare tactics term simply means that there is no database record of an un-serialized gun being transferred. However, the United States government does not, nor have they ever, maintained a registry of all guns in America anyway, including new sales.
A few, select restrictive states may require registration only within their state. The term “untraceable” unfortunately has had the consequence of leading some unknowing readers to believe these guns can make it through metal detectors and not that is related to database tracking.
That leads to the next issue – 3D printing.
— CBS News (@CBSNews) November 13, 2019
MSN.com writes, “Newtown Action Alliance said that in some cases, these firearms can be made almost entirely from plastic parts, except for a metal nail used as a firing pin.”
However, what the article or Newtown Action Alliance fails to mention is that while there have been instances of incredibly simple, poorly-performing firearms made by 3D printers, they are not like the semi-automatic handguns used in the California shooting that they’re creating hysteria around.
USA Today noted that Professor Jody Lynne Maderia acknowledges the simplicity of the 3D printed guns that are capable of manually loading only one or two rounds.
“An assassin who needed to use a one-shot gun — that would be perfectly safe for him — so long as he took someone out with the first shot,” said Madeira, who teaches on the Second Amendment at Indiana University.
The gun used in Santa Clarita still required a metal lower receiver. Additionally, even a plastic 3D printed gun still requires metal ammunition. If the purpose of this quote is to say that plastic guns can be brought through metal detectors, a potential shooter would likely be caught simply by the ammunition.
The Trump administration is pushing a rule enabling people to post gun blueprints online, which would allow anyone – including criminals and terrorists – to 3D print untraceable guns on demand.@RealDonaldTrump, #StopDownloadableGuns! pic.twitter.com/aE1oj0OZSM
— Shannon Watts (@shannonrwatts) November 19, 2019
Additionally, it is very unlikely that a 3D printed gun is actually safe for a shooter, contrary to Professor Maderia’s opinion.
The ATF even released a video of a plastic gun exploding upon being fired. Experts in manufacturing and materials have repeatedly stressed that plastic or polymer materials are not capable of withstanding the pressure emitted when a bullet is fired, resulting in tremendous risk to the person firing the weapon.
Pete Basiliere, research president at Gartner said, “A typical 3D desktop printer is not up to the task… It probably won’t have the quality of build to make the gun safe. Even if the quality is acceptable, the range of materials that are used in an extrusion printer are so limited that there’s a great risk of the gun misfiring in your hand… A person who wants to make a metal gun needs access to a very expensive machine that is not simple to operate if your gun-making is above board.”
How much is a 3D printer capable of printing a metal gun? Upwards of $100,000, which is far outside the affordability of a common criminal or disgruntled high school student.
All guns made by a metal 3D printer would also be detectable through metal detectors. Additionally, if a building is requiring visitors to pass through a metal detector, odds are that it’s already a gun free zone. Bringing any gun in, plastic or metal is already illegal.
So, if we take an educated assessment of the hysteria regarding “ghost guns” we can honestly say that unfinished kits are not simple to assemble. We can be honest that 3D printed plastic guns are unreliable without metal. We can be honest that the gun used in California was not a 3D printed gun.
We can be honest that guns still require metal ammunition. We can be honest that all guns in America were ghost guns until 1968. We can be honest that the father of the Santa Clarita shooter was already a prohibited possessor.
We can be honest that a 16-year old was already breaking the law by possessing a gun. We can be honest that under California law, that gun was already required to be serialized and the law did not prevent the shooting.
We can be honest that bringing a weapon into a gun free zone is already against the law. We can be honest that transferring a firearm without a serial number is already illegal. We can be honest that murder is already illegal. We can be honest that there are scores of laws already in effect that did not prevent this shooting.
It is time to be honest about one more thing… a legislative effort to ban ghost guns will likely lead to calls for a national registry of all firearms. A national registry of firearms is the only way to achieve a national confiscation of firearms.
Want to make sure you never miss a story from Law Enforcement Today? With so much “stuff” happening in the world on social media, it’s easy for things to get lost.
Make sure you click “following” and then click “see first” so you don’t miss a thing! (See image below.) Thanks for being a part of the LET family!